Bowflex Motivator 2 User Manual download pdf (Page 2)

STEP 1.

Have the appropriate bolts ready for the

appropriate parts.

Locate Base Frame and Pulley Frame.

(Square box)

Attach pulley frame to base frame with four

3/8"x1" tap bolts and four 3/8" flat washers,

tighten with a 9/16" wrench. See 1A.

Note: Leave pulleys and cables wrapped

until assembly is complete.

Pulley Frame

Base Frame

STEP 2.

Locate Lower Mast. (Square box)

Align lower mast against the face of the pulley frame.

As pictured in 2A.

Align holes in lower mast with holes in base frame.

Secure the center of the lower mast to the pulley

frame with the 6" carriage bolt, 3/8" washer and

a 3/8" lock nut.

IMPORTANT Hand tighten lock nut until both

Hex Head bolts are in place below then tighten with

9/16" wrench. See 2A.

Insert two 4 1/2" hex head bolts, two 3/8" washers.

Secure with two 3/8" nylon lock nuts. Tighten with

9/16" wrench. See 2B

Lower Mast

Motivator

Secure Lower Mast to pulley

frame with 6" Carriage Bolt.

Two 4 1/2" Hex Head Bolts.

After securing 4 1/2" bolts below,

tighten nylon lock nut of carriage

bolt with a 9/16" wrench.

1 2 3 4 5 6 7 8

No comments

Bowflex Motivator 2 User Manual Page 2