Bowflex TC5300 Owner's Manual download pdf (Page 14)

ASSEMBLY GUIDE

BEFORE YOU ASSEMBLE

Basic Assembly Principles

Here are few basic assembly tips that can make assembly of your

Bowflex® TreadClimber® fitness machine quick and

easy.

1. You can make the assembly process go faster by gathering the pieces you need for each step prior to starting the

step.

2. As a general rule, and for all bolts and locknuts on your

Bowflex® TreadClimber® fitness machine, turning toward

the right will tighten, turning towards the left will loosen. An easy way to remember this is by remembering the

expression, “Lefty loosey, righty tighty.”

3. All of the tools needed for assembly of your

Bowflex® TreadClimber® fitness machine have been included with

the unit. You may ﬁnd the use of a utility knife or scissors beneﬁcial during the unpacking and assembly process.

4. It is recommended that you use two people to assemble your Bowﬂex® TreadClimber® ﬁtness machine.

Select Your Workout Area

Select where you are going to put your Bowﬂex

TreadClimber

ﬁtness machine carefully. The best place for your

TreadClimber

ﬁtness machine is on a hard, level surface. You will need at least 19 inches (0.5 meters) on each side and

79 inches (2 meters) in the rear of the machine for dismount.

Make sure that the location you choose has a power outlet within reach of the TreadClimber

ﬁtness machine power

cord, preferably to the front of the machine where you will be less likely to step on the cord during dismount.

NOTE: The TreadClimber

fitness machine is designed to plug into a grounded, non-GFI outlet only. To determine

if your outlet or circuit breaker is GFI, look for a test and reset button on them. If they have the test and

reset button it is a GFI outlet or circuit breaker.

Further, if you ever perform any repairs on your TreadClimber

ﬁtness machine that require you to lay it on its side, you

will need at least 5 feet (1.5 meters) to one side of your workout area.

Machine Mat

The Bowﬂex

TreadClimber

Machine Mat is an optional accessory for the TreadClimber

ﬁtness machine that helps

keep your workout area free from debris and dust. The rubber ﬂoor mat provides a non-slip surface for you to use when

mounting and dismounting the TreadClimber

ﬁtness machine and limits static discharge when you touch the machine,

reducing the possibility of display or running errors. Further, a rubberized mat will protect your ﬂooring when you are

performing repairs or maintenance on the TreadClimber

ﬁtness machine.

Put your Bowflex

TreadClimber

Machine Mat in place in your selected workout area before you start assembly to

protect your floors and your TreadClimber

fitness machine from damage.

Positioning Your TreadClimber

Fitness Machine

Take great care when moving your TreadClimber

ﬁtness machine into place prior to assembly.

Select a location for your TreadClimber® ﬁtness machine with access to a non-GFI protected circuit, within reach of the

power cord.

There are two handles for lifting on the front of the base below the console and two wheels on either side of the rear

step of the base platform. The TreadClimber

® fitness

machine requires considerable force to raise the base the 30

degrees necessary to roll it on the rear wheels for storage or cleaning. Due to the weight of the machine, it is highly

recommended that you do not attempt to ever lift or move the TreadClimber

® fitness

machine without help.

When you assemble the TreadClimber

® fitness

machine, you will need at least two people to set the base in place, and

lift the console/handlebar assembly.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 75 76

Comments to this Manuals

No comments

Bowflex TC5300 Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Fitness, gymnastics & weight training Bowflex TC5300